Pipe ea ho roala 3LPP

3LPP coating pipe ke sesebelisoa se phahameng-se sebetsang hantle se sireletsang lipeipi tse etselitsoeng-litšebeletso tse phahameng tsa mocheso le tikoloho e hlokang mochini. Sistimi ea 3LPP e na le:
1.Fusion{1}}Bonded Epoxy (FBE) primer - e fana ka matla a ho khomarela le ho thibela kutu.
2.Sekhomaretsi sa Copolymer - se tiisa matla a phahameng a peel le ho tšepahala ho tlamahaneng.
3.Polypropylene (PP) lera le ka ntle - e fana ka boima bo ikhethang ba mochine, ho hanyetsa abrasion, le botsitso ba mocheso ho fihlela ts'ebetsong e tsoelang pele ea 110-120.
Ha ho bapisoa 3LPE, 3LPP e ratoa libakeng tse chesang haholo, litsing tsa lehoatata, le liphaephe tse tsamaisang oli e chesang kapa{2}}khase ea mocheso o phahameng, moo polyethylene e ka senyehang.

• ISO 21809-1– Tekanyetso ea machaba ea lifeme{0}e kentsoe lilakane tsa 3LPP liphaepheng tse patehileng kapa tse kolobisitsoeng ke metsi.
• DIN 30678- Litlhaloso tsa Sejeremane tse hlalosang botenya ba ho roala, ho hanyetsa phello, indentation le liteko tsa peel.
• Tumellano e eketsehileng:NACE, EN, le projeke-maemo a khethehileng a DEP a teng.
• Mefuta e Tloaelehileng ea Liphaephe:4" - 56" (tloaelo ho fihla ho 60 ″)
• Botenya ba Coating:2.5 - 5.0 mm ho itšetlehile ka OD le sehlopha sa tšebeletso
• Boemo ba Mocheso:Tšebeletso ho fihlela ho likhato tse 120

• 2LPP:Primer + PP jekete feela; e fokotsehile khahlano le disbondment ea cathodic ha e bapisoa le 3LPP.
• 3LPP:Sistimi e felletseng-e nang le thae e khomarelang; e phahametse tlamahano, ho tšoarella, le botsitso ba mocheso.
• 3LPE:Khopolo e ts'oanang ea -e nang le baki ea polyethylene; e nepahetse bakeng sa tšebeletso ea <80℃le litšenyehelo-tšebeliso e akaretsang.
• Ts'ebetsong:3LPP e hlalositsoe bakeng sa-libaka tse phahameng tsa mocheso le tse mabifi, athe 3LPE e khethetsoe liphaephe tse tloaelehileng tse patiloeng.

• Ho lokisa holim'a metsi– Ho phatloha ho hoholo ho isa ho Sa 2½, ho theha profaele ea ankora.
• Ho futhumatsa ho kenya letsoho- Pipe e futhumetse ho fihlela ho ~ 200-220 degrees .
• Sesebelisoa sa pele sa FBE– Electrostatic spray of fusion{0}}bonded epoxy.
• Sesebelisoa sa sekhomaretsi sa Copolymer- Co{{0}mofuta o fetisitsoeng kapa oa phofo, o fana ka bonto.
• Polypropylene topcoat extrusion- Lera le ka ntle le teteaneng le sebelisitsoe, le kopantsoe tlas'a khatello.
• Ho pholisa le ho itokisa- tima tse laoloang, li-cutbacks tsa beveled bakeng sa welding ea tšimo.
• Tlhahlobo ea ho qetela- 'Mapa oa botenya, ho lemoha matsatsi a phomolo, liteko tsa peel / tšusumetso / indentation.

• Litekanyo tsa botenya ho latela DIN 30678 & ISO 21809-1.
• Teko ea matsatsi a phomolo (spark) bakeng sa masoba.
• Lithempereichara le ho hanyetsa lithempereichara tse phahameng.
• Metsi a chesang a soak & liteko tsa cathodic disbondment.
• Matla a peel & netefatso ea ho khomarela.
• E fumaneha ka botlalo ka litifikeiti tsa EN 10204 3.1/3.2.

• Lipeipi tsa oli tse chesang (litsela tsa lebopong le lehoatateng)
• Phetiso{0}}ea mocheso o phahameng oa khase ea tlhaho
• Liphaephe tse ka har'a li-backfill tse mafika kapa li-HDD crossings (abrasion e phahameng)
• Lithapo tsa leoatle le likhoele tse ka tlas'a leoatle tse hlokang tšireletso e matla ea mochini
• Liphaephe tse futhumatsang tsa setereke

• Mehala ea ho roala e tsoetseng pele e kopana le litlhoko tsa DIN 30678 / ISO 21809-1.
• Tloaelo ea botenya le likhetho tse fokolang bakeng sa merero e hlokang.
• E netefalitsoe-mocheso o phahameng libakeng tsa mahoatata le maoatle.
• Phepelo e kopaneng ea LSAW, SSAW, ERW, le phaephe e seamless e nang le litlolo.
• QA/QC e tiileng, phano e potlakileng, le litšupiso tsa merero ea lefats'e.

• Sistimi:FBE + Adhesive + Polypropylene (mekhahlelo e 3)
• Maemo:ISO 21809-1, DIN 30678
• Liphaephe tse fapaneng:4" - 56" (tloaelo ho fihla ho 60 ″)
• Botenya ba Coating:2.5 - 5.0 limilimithara
• Mocheso oa Tšebeletso:Ho fihlela ho likhato tse 120
• Lisebelisoa:Liphaephe tse chesang tsa oli le khase, HDD, sebaka se mafika, li-rivers tsa leoatle

Setifikeiti

 

Setifikeiti sa CE

Setifikeiti sa ISO 9001

Setifikeiti sa API Q1

Setifikeiti sa ABS

Setifikeiti sa AP-5L

Setifikeiti sa API-5CT

 

Hot Tags: Pipe ea ho roala 3lpp, China 3lpp bahlahisi ba lipeipi tsa ho roala, barekisi, fektheri