Thomello ea Morero oa Pipeline ea Tlhaho ea Argentina & Netefatso ea Botho ea BV{0}

Liphaephe tse ngata le likarolo tsa lipeipi li phethetse tlhahlobo-ea mokha oa boraro bakeng sa projeke ea ho etsa lipeipi tsa khase ea tlhaho ea Argentina{1}moo ho sa buisanoeng ha taolo ea lintho tse bonahalang, ho nepahala ha boholo, le ho latelloa{2}}moo.

Se ileng sa hlahella tokollong ena ketight bore (ID) taololesephetho se hloekileng sa bokaholimohoASTM A106 Grade B (ASME B36.10) liphaephe tse se nang moeli, hammoho letumellano-ea maemo a mabelie hlokoang ke morero.

Sephutheloana sena se koahela phala ea tšepe ea carbon le likarolo tse tšoanang tsa lipeipi bakeng sa tlhahiso ea phetisetso ea khase, ho kenyelletsa:

• Pipe ea Mola:API 5L SAWL (limaraka tsa projeke li kenyelletsa X52 / X70; mohlala oa X70 o rekotiloeng tlhahlobong)
• Seamless Pipe:ASME B36.10,ASTM A106 Gr. B, BE, 11,7 m
• Flanges: MSS SP-44 + ASME B16.5, lisebelisoa tse kenyeletsangASTM A694 Gr. F42 (290) / F52 (360) / F70 (485); hammoho le lintho tsa ASME B16.5 A105
• Threadolet:MSS SP-97,ASTM A694 Gr. F52 (360)
• Spiral Wound Gasket:ASME B16.20; thepa tlhophiso e kenyeletsa304SS + graphite e tenyetsehang(FG) ka har'a motsoako oa selikalikoe / ka hare
• Stud Bolts + Heavy Hex Nuts:bolting netefalitsoeng hoASTM A193 Gr. B7 / ASTM A194 Gr. 2H
• Reducer Eccentric / Cap / Tee:MSS SP-75 lintho tse kenyeletsangGr. WPHY-52leGr. WPHY-70

Bakeng sa merero e mengata ea ho etsa liphaephe, li-flanges li fetoha "botlolo ea ho amohela" hobane litšoantšo, lihlopha le lintlha tsa sefahleho li tlameha ho lumellana hantle.

Sehlopha sena se kenyeletsatjheseletsa molala flangese entsoe le ho tšoauoa ka bobeli MSS SP-44 le ASME B16.5, ka-matla a hodimoASTM A694limaraka (F42/F52/F70) tse sebelisoang ho pholletsa le boholo le litlhoko tsa litekanyetso.

Bakeng sa A106 Gr. B (ASME B36.10) phala e se nang moeli, tlhahlobo e ile ea tlaleha ka bobelidimension checkslediteko tse kahodimodimopele ho penta{{0}hobane boreleli le boemo ba bokaholimo bo ama ka kotloloho ho lekana{1}}holimo, boemo ba ho phalla, le ho tsitsa ha thepa.

Bore (ID) le Taolo ea Dimensional (Liphetho tse Rekotiloeng)

• NPS 16" SCH80, 11.7 m:

ID e lekantsoeng365.2–366.8 limilimithara (a 1.6 limilimitharafensetere), ka bolelele bo lekantsoeng11726-11730 limilimithara

• NPS 24" SCH80, 11.7 m:

ID e lekantsoeng545.6–548.1 limilimithara (a 2.5 limilimitharafensetere), ka bolelele bo lekantsoeng11714-11717 limilimithara

Ha e le hantle: ho ata ha "tighter bore spread" ho bolela ho fokotseha ha "hobaneng sena se sa eme" nakong ea ho lokisa-le ho kopanya.

Bokhopo ba Bokaholimo (Pele ho Penta)

• Liphaephe tsa NPS 24: 123-162 µin
• Liphaephe tsa NPS 16: 134-167 µin

Ho pholletsa le sehlopha sena,{0}}mesebetsi ea tlhahlobo ea batho ba bang e kenyelelitsoetlhahlobo ea pono, netefatso ea bongata, licheke tsa mahlakore, netefatso ea ho tšoaea, le tlhahlobo ea litokomane-ka licheke tse ling joalo kanetefatso ea ellipalitybakeng sa phala ea mohala oa SAWL.

Bakeng sa bolting le li-gaskets, tlhahlobo le eona e tlalehiloeliteko tsa ho kenya bolt/nut(ho qoba ts'oaetso ea likhoele / kotsi ea ho jamming) le ho netefatsoa ha thepa ea gasket le licheke tsa ho latela.

Ikopanye hona joale

LBH

 

 

01.Liphetho tse netefalitsoeng tsa bophara ba kahare (ID) bakeng sa liphaephe tsa ASTM A106 Gr.B tse seamless SCH 80 e bile life?

Li-ID tse rekotiloeng li ne li365.2–366.8 limilimithara (NPS 16 SCH 80, 11.7 m)le545.6–548.1 limilimithara (NPS 24 SCH 80, 11.7 m)-ea bontšataolo e thata haholo ya borobakeng sa ho lokisa{0}}

02.Ke litekanyetso life tsa ho ba makukuno tse neng li lekantsoe liphaepheng tsa A106 Gr.B (pele ho penta)?

Ho bala ka thata ho ne ho123–162 µin (NPS 24)le134–167 µin (NPS 16), e tšehetsang aboemo bo hlwekileng ba bokahodimobakeng sa ho itokisetsa ho koahela le ho amoheloa.

03.Hobaneng ka bobeli MSS SP-44 le ASME B16.5 li totobalitsoe bakeng sa li-flange tsa Sehlopha sa 600?

Hangata merero ea liphaephe e hlalosa maemo a mang a litšoantšo / li-PO; flanges tse tšoailoeng le ho netefatsoa hoMSS SP-44 + ASME B16.5(kaASTM A694 F42/F52/F70) fokotsa kotsi eaho hana ho nyallana ho tloaelehilengnakong ea ho amohela le tlhahlobo ea QA.

04. Li-stud bolts/nuts li lokela ho laeloa joang ho thibela tieho-ea sebaka sa marang-rang?

HlalosaASTM A193 B7 / ASTM A194 2H, hot-dip galvanizing ho ASTM F2329, hantleboleele/ khoele, le ho hlokatlhahlobo ea bolt-nut fitho qoba khoele ea khoele le ho emisa kopano.

Setifikeiti

 

Setifikeiti sa CE

Setifikeiti sa ISO 9001

Setifikeiti sa API Q1

Setifikeiti sa ABS

Setifikeiti sa AP-5L

Setifikeiti sa API-5CT